650V GaN power ICs for power adapters have driver and protection
- Release on:2023-12-01
The parts, called LMG362x, differ in the size of the GaN hemt switch included. They are:
- LMG3622 650V120mΩ 8.5A
- LMG3624 650V 170mΩ 6A
- LMG3626 650V 270mΩ 3.6A
“Using the LMG3622 only requires setting the desired turn-on slew rate with a programming resistor and
calculating the current sense resistor,” according to the company. Using the ICs “designers can reach up to 94% system efficiency for <75W ac-dc applications, or above 95% system efficiency for >75W ac-dc applications”.75w>
Features include a bottom-side cooled 8 x 5.3mm QFN package, cycle-by-cycle over-current protection, enable pin, over-temperature protection and slew rate control. For the …24 and …22, TI adds USB C/PD compatibility to this list.
The devices are optimised, said TI, for quasi-resonant fly-back, asymmetrical half-bridge fly-back, inductor-inductor-converter (LLC), totem-pole power factor correction and active clamp fly-back topologies.
There is an evaluation module for each IC, all implementing a 65W quasi-resonant fly-back converter with USB Type-C PD: LMG3622EVM-082 (left), LMG3624EVM-081 and LMG3626EVM-074.
For example, …2EVM-082 meets CoC Tier 2 and DoE Level 6 efficiency requirements and works fom inputs across 90 to 265Vrms to outputs of 20Vdc at 3.25A, or 5, 9 or 15Vdc at 3A.
If current sensing is not required, LMG3612 and LMG3616 are similar pad-for-pad devices.
Find the 120mΩ 8.5A LMG3622 on this product page and its evaluation board here